Size: Width Height

Colors: Number of It is highly recommended that any ink on clear material should be backed with white. White is a color on clear decals and must be priced as an additional color.

Material:

FL8/White Flex Vinyl 3.5milFL1/White Mylar 2milFL12/V400H Clear VinylFL3/Clear Mylar 2milMU1/Lexan 10mil Velvet ClearMU2/Lexan 5mil Velvet ClearMU3/Lexan 20mil Velvet ClearNI2/Reflective GrayRI5/White Cast Vinyl 2milRI6/Brush Chrome Mylar 2milRI5C/Clear Cast Vinyl 2milFL16/FLX000299 CONFORMcal FL17/V400 FS White V-29 90 PFW FL7/V-400 FLEX WHITE V-156 90 PFW Double Faced
Most popular. 3.5 mil semi-flexible white vinyl. Permanent pressure-sensitive acrylic adhesive backing. General purpose: high-performance white product identification marking material. Great for a variety of surfaces. Smooth,concave or textured surfaces. Expected exterior life: 2 years. Add our GE2 laminate for 1-2 years of additional life. Chemical resistance: Basic cleaners Good; Gasoline Fair; Toluene Poor; Water Good.

Cutting:

Square Corner CutCustom Die CutRadius Corner Cut There is no additional charge for this option. Each corner is cut at a 90 degree angle. We also include slitting on the decal back liner for easy application, exception is decals smaller than 1" x 1".

Product Performance and Suitability: All of the descriptive information, the typical performance data, and recommendations for the use of RRI Decal products shall be used only as a guide and do not reflect the specification or specification range for any particular property of the product. Furnishing such information is merely an attempt to assist you after you have indicated your contemplated use and shall in no event constitute a warranty of any kind by RRI. All purchasers of RRI Decal products shall be responsible for independently determining the suitability of the material for the purpose for which it is purchased. No distributor, salesman, or representative of RRI is authorized to give any warranty, guaranty, or make any representation in addition or contrary to the above.